廊坊博耐环保科技有限公司

Contact:
+86 18931685668 | bonai@tilefrp.com
Add:
中国河北省廊坊市大城县宫村
 

Provisions on screws during installation of endurance plate

Provisions on screws during installation of endurance plate
The installation quality of the endurance board is particularly high, and even a screw is a new item that will endanger the endurance board. Once unsuitable screws are selected, the service life of the endurance plate will be endangered. Now let me show you some practical regulations on screws during the installation of endurance boards.

1、 Endurance plate and screw hole shall not be too close
Special attention should be paid to the installation of the endurance plate. The screw hole should not be too close to the endurance plate. If the distance is too close, the endurance board may be damaged. While ensuring that the endurance board is intact, it is also necessary to master the distance between the screw hole and the outside of the board. In addition, it is also necessary to consider the tightness of the screws to prevent the plate from bursting when it is too loose, and the plate from deforming when it is too tight.
Next, the space between the adjusting plate and the screw

When installing the endurance plate, it is also necessary to pay attention to the selection of the screw types of the extruder. Self tapping screw is a good choice, otherwise it is easy to cause greater and greater ground stress. In these aspects, it is very helpful for the installation quality of endurance boards. This kind of installation habit is also of great use value for the future application of endurance board.

During installation, adjust the distance between the screws and the distance between the screws and the edge of the plate according to the thickness of the endurance plate. The interval meeting makes the endurance board and all engineering buildings extremely unstable, and the change of screw size, season and temperature of the extruder will also hinder its stability.
This is the stipulation of the endurance plate for the screws during installation. All aspects of the screws will do harm to the endurance board and all engineering buildings. In order to better ensure the construction quality, it is necessary to pay attention to the provisions of the endurance plate on screws.

X
zh_CNChinese